Measurements using the Volscan Profiler
Many products come with claims for enhanced and long-lasting hair body or volume while taming flyaways and frizz. As with any other claim, scientific testing must back it up. Methods to do so include the measurement of the body of a tress sample using a custom made holder (volume, surface area, frizziness and furthest flung hair) and the measurement of a mannequin head (comparison of treatments on each side of the head, root lift and crown volume on each side).
High body follows the loose definition of thick and bouncy hair with high volume and much movement when the head is turned. It may also be defined as hair with good elevation from the scalp in both the vertical and lateral directions.
 |
| Volscan Profiler 600; Hair tress sample testing in progress |
Previous methods of hair body measurement fall into four main categories:
- Digital image processing of backlit hair swatches (sometimes swatches are turned while being photographed – images are processed to separate ‘bulk’ and ‘frizz’)
- Laser stereometry of a static tress
- Dynamic tests, during which a tress is swung side to side and the height reached is measured
- Manual measurements of tress or mannequin head samples using Vernier callipers
Performing a hair body measurement in the Volscan Profiler combines the movement of dynamic testing with the laser measurement feature of laser stereometry and the flexibility of manual calliper measurements with a considerably reduced analysis time.
Laser Profiling – Tresses
Hair tress samples are widely used in the hair industry as they provide a controlled sample mass in a format that is easy to treat according to the requirements of the manufacturer. The measurement of their 3D properties is invaluable, providing information on volume and frizziness. For each manufacturer, a custom tress holder is designed to fit the geometry of the resin-bound top of their tresses. The tress sample is mounted centrally around a metal rod that allows the sample to turn during a scan.
The 3D point cloud generated from the scan is processed to calculate the percentage of outliers from the bulk shape, giving a frizziness value measured as a percentage:
Laser Profiling – Mannequin Heads
Mannequin heads are widely used in the haircare industry for use in the assessment of haircare products, particularly those that claim to give good body, root lift or hold. They are simple to measure in the Volscan Profiler with the use of a custom made base to hold the head.
The Volscan Profiler allows the measurement of many different aspects of mannequin heads.
The 3D scan can be manipulated in certain ways to allow for the separation of properties from different sections of the head. The recommended mannequin head measure-ments include:
- Whole head measurement (e.g. volume, root lift / crown height and crown base area / lateral volume)
- Analysis of head in two vertical halves (e.g. volume)
- Analysis of crown section of each half (e.g. volume, root lift / crown height and crown base area / lateral volume)
Laser Profiling – Curl Retention Samples
A large portion of the haircare market is dedicated to providing products that will prevent curled hair from drooping throughout the day, under fluctuating stresses or in a particularly humid environment. A common test used to substantiate these claims is the ‘curl retention test’.
In this test, a hair sample is moistened, the fixative under investigation applied, then the curl is rolled around a curler and held in place at a controlled temperature. When it is dry, the tress is removed from the curler and subjected to challenging conditions – for example, it may undergo multiple cycles of extension to a high strain, or placed in a controlled humidity chamber.
The ‘curl retention’ is measured in the form of a percentage length change at set time periods. This measurement is traditionally a manual one, and so prone to human error. However, using a similar attachment setup to the Volscan Profiler hair tress holder, the curl can be fed onto the metal rod and held at the top. Its length is measured from the resulting 3D scan.
When a tress is undergoing high strain cycles as part of this process, they are traditionally applied by hand. A technician stretches the tress a set number of times before the curl measurement. However, this step can be replaced with a much more reliable technique using tensile grips and a Texture Analyser, applying exactly the same extension per cycle (unlike the manual process). This removes the uncertainty and error that comes from the traditional manual method.
To display curl retention as a percentage of the original length before humidity or strain were applied; this can be carried out in a Volscan Profiler macro after the scan has been performed.
Conclusions
The research and development behind hair products requires continuous innovation to keep up with trends and account for hair diversity. All products come with claims to hold, shape, colour, condition or add volume to hair, and all these claims must be tested in the laboratory.
A wide range of hair and hair product test methods is built into Exponent Texture Analyser and Volscan Profiler software and will automatically load at the click of a button.
There is a Texture Analysis test for virtually any physical property. Contact Stable Micro Systems today to learn more about our full range of solutions.
For more information on how to measure texture, please visit the Texture Analysis Properties section on our website.
The TA.XTplusC texture analyser is part of a family of texture analysis instruments and equipment from Stable Micro Systems. An extensive portfolio of specialist attachments is available to measure and analyse the textural properties of a huge range of food products. Our technical experts can also custom design instrument fixtures according to individual specifications.
No-one understands texture analysis like we do!
Get in touch to discuss your specific test requirements
No comments:
Post a Comment